Pool Care™

One-component pool paint

Suitable for direct application on pools, fountains, etc. Resistant to the permanent strain caused by water and to mold and fungi growth.

Πλεονεκτήματα

  • Resistance to UV radiation and chalking
  • Resistance to water and chemicals
  • Strong adhesion to concrete
  • Quick drying
  • Easy application

Αποχρώσεις:White,Blue

Συσκευασία:3lt,10lt

Τεχνικές Πληροφορίες

Τεχνικά Στοιχεία

ΑΡΑΙΩΣΗ
5 - 10 with KRAFT NITRO SOLVENT 1100
ΑΠΟΔΟΣΗ
8 - 10 m²/L
ΣΤΕΓΝΩΜΑ
1-2 hours

Εφαρμογή - Εργαλεία

Πινέλο
Ρολό
Πιστόλι Aέρος
Πιστόλι Airless
Πινέλο
Ρολό
Πιστόλι Aέρος
Πιστόλι Airless
Πινέλο
Ρολό
Πιστόλι Aέρος
Πιστόλι Airless

Κατεβάστε τα αρχεία

Γενικές Πληροφορίες

Special, one-component paint formula suitable for direct application on pools and fountains of concrete or cement mortar. It is easily applied and dries quickly. It features high performance creating a hard but elastic film, with excellent behavior against UV radiation. It is also resistant to the permanent strain caused by water and to mold and fungi growth on the pool surface. Finally, it behaves very well towards chlorine and chemical solutions for pools.

Πώς να το χρησιμοποιήσετε

To ensure good adhesion, the surface must be dry (humidity limit

On previously painted surfaces: remove old paints using solvents or mechanical means to ensure proper adhesion of the paint. Use KRAFT STRONG REPAIR 84 to fill gaps, cracks and other damaged parts.

For protection against negative tensions, apply 2 coats of KRAFT HYDROGUARD FLEX crosswise. Enhance the edges using KRAFT HYDROGUARD NET antialkaline reinforcement mesh.

Stir very well before and during application using a low-speed stirrer until homogeneous.

Thinning: 1st coat: 5-10% with KRAFT NITRO SOLVENT 1100 2nd or 3rd coat: 0-5% with KRAFT NITRO SOLVENT 1100.

Apply 2 coats of KRAFT POOL CARE for best results. Keep the coat thickness under 120mm, to avoid blistering, bubbles or untimely chipping off of the paint..

Clean the tools and product residues immediately with KRAFT NITRO SOLVENT 1100..

Store the product between 5°C and 35°C and

Keep containers tightly closed.

In case of high surface temperature >55oC, the material tends to soften. Protect it by applying on the directly exposed to the sun edges around the pool, a solvent based 2-component PU transparent varnish

Οι χρωματικές μας
λύσεις

Βρείτε την προϊοντική λύση που σας ταιριάζει. Δείτε τα προϊόντα μας online ή επισκευτείτε το κοντινότερο συνεργαζόμενο κατάστημα.

Ο κόσμος των χρωμάτων μας