Relief
Decorative textured coating
White textured render for interior and exterior use. It is suitable for walls, plaster, concrete, bricks, wood, chipboard, and asbestos cement. It is highly resistant to rain, frost, and air pollution. It covers minor imperfections of the substrate.
SEE THE FANDECKAdvantages
- High resistance
- Excellent textured finish
- Effective coverage
- Easy application
Product information
Shades:White
Packaging:5kg,15kg
Technical Info
Technical Information
THINNING Ready to use
COVERAGE 2 - 3 m²/kg
DRYING 1-2 hours
0%
2 - 3 m²/kg
1-2 hours
Application - Tools
Brush
Relief Roller
rolo.svg
Ρολό Relief
pinelo.svg
Πινέλο
Download the files
General Information
White, water-based textured render for interior and exterior use. It is suitable for walls, plaster, concrete, bricks, wood, chipboard, and asbestos cement. It is highly resistant to rain, frost and air pollution. It covers minor imperfections of the substrate.
How to Use
To ensure good adhesion, the surface must be dry, clean, and free of dust, grease, salts, rust, residues, blistered paint, etc.
- Putty application: KRAFT PUTTY, scrub, KRAFT SPACHTEL, scrub, priming with KRAFT ECO DUR AQUA.
- On new surfaces: Exterior: 1 coat of KRAFT ECO DUR AQUA or and 2 coats of KRAFT RELIEF. For better protection a final coat of KRAFT 4 SEASONS or KRAFT 4 SEASONS ELASTIC is recommended 2-3 days after application.
- Interior: 1 coat of KRAFT ECO DUR AQUA and 2 coats of KRAFT RELIEF. 1st coat thinning: 20%.
- On surfaces with trapped moisture, mold, fungi and algae: Removal of residues, KRAFT MOLD BLOCKER cleaning, priming with KRAFT ECO DUR AQUA and 2 coats of KRAFT RELIEF.
- Allow new surfaces of plaster or concrete to dry completely for at least 30 days before the paint application.
- On surfaces with stains, smoke, trapped moisture: 1 coat of KRAFT ECO STAIN BLOCKER AQUA and 2 coats of KRAFT RELIEF 24 hours later.
- Fresh concrete, plaster, stucco: To be painted no earlier than 30 days after application of KRAFT ECO DUR AQUA primer.
- Stir well before and during application.
- Clean the tools and the product residues immediately with warm water and soap or detergent.
