FixoTile Pro 5
Cement-based, adhesive for ceramic tiles, internal usage
FixoTile Pro 5 is a cement- based, white adhesive for ceramic tiles. It is developed with the proper combination of inorganic binders and organic additives in order to perform perfect adhesion of ceramic tiles on to normal cementitious substrates. It is classified as tile adhesive, type C1, according EN 12004.
Advantages
- High adhesion & moisture resistance, on usual substrates
- Excellent workability & thixotropy
- Application thickness up to 10mm
- Indoor usage
Product information
Shades:White
Packaging:25kg
Certifications / Evaluations
C1_EN12004
Technical Info
Technical Information
THINNING 5,80 lt water in 25kg FixoTile Pro 5
COVERAGE 3-5 kg /m²
DRYING Wall tiles: 4-8 hours, Floor Tiles: 24 hours
5,80 lt water in 25kg FixoTile Pro 5
3-5 kg /m²
Wall tiles: 4-8 hours, Floor Tiles: 24 hours
Application - Tools
Spatula
spatoyla.svg
Σπάτουλα
Download the files
General Information
FixoTile Pro 5 is suitable for bonding decorative ceramic tiles on floors or walls with dimensions up to 30x30cm, on normal cementitious substrates (surfaces of concrete, screed, renders). Indoor usage.
How to Use
- To ensure good adhesion, substrate should be clean, solid, without large unevenness (≤10mm), free of dust, oil, lime, tar and loose elements.
- Any new cementitious substrates (e.g. concrete, cement mortars, plasters, etc.) are ensured to be sufficiently cured for a period of at least 28 days, depending conditions.
- On absorbent surfaces, before application, soak with water, without
forming stagnant water.
- Apply the adhesive up to 10mm thickness on the substrate using a notched trowel of appropriate size.
- Then apply the tile with constant pressure to ensure good entire surface contact between adhesive & tile.
- In normal conditions of temperature and humidity, the open time is 20 minutes. Otherwise, this time can be significantly reduced in adverse conditions (e.g. strong sunlight, high temperatures, dry air currents).
- In any case, it is recommended to check the surface of applied adhesive, before tile fixing, to make sure that no membrane («skin») has formed.
- Otherwise, renew the adhesive by running notched trowel over it. If the adhesive has already start to set, remove it and spread a new «fresh» adhesive layer.
- Under no circumstances should the surface of the applied adhesive be wetted with water.
- Tools should be cleaned immediately after application with plenty of water while the material is still fresh or otherwise mechanically. Remove as much material as possible from tools before cleaning.
- Stored on wooden pallets and in a dry environment with temperature above 5°C for 12 months from the production date.
