Epoxy Aqua Antirust Primer
Water-based epoxy anticorrosive primer
Suitable for priming interior and exterior metallic surfaces like galvanized, aluminum, stainless steel and glass. It creates the ideal substrate for the paint application.
Πλεονεκτήματα
- High anticorrosive protection
- Strong adhesion to all surfaces
- High hardness and elasticity
- Very easy application
Πληροφορίες Προϊόντος
Αποχρώσεις:Grey
Συσκευασία:1lt ( A 0.75lt + B 0.25lt ),3lt ( A 2.25lt + B 0.75lt )
Τεχνικές Πληροφορίες
Τεχνικά Στοιχεία
Εφαρμογή - Εργαλεία
Κατεβάστε τα αρχεία
Γενικές Πληροφορίες
Two-component water-based epoxy anticorrosive primer suitable for interior and exterior metallic surfaces where high mechanical resistance and high anticorrosive protection are required. Thanks to its special formula, it features high hardness and elasticity following the contractions and expansions of the metal. It also provides excellent adhesion to almost all surfaces, like galvanized, aluminum, stainless and glass. It is of low odor and applied easily offering an ideal substrate for the paint application. .
Πώς να το χρησιμοποιήσετε
To ensure good adhesion, the surface must be dry, clean, and free of dust, grease, salts, rust, residues, blistered paints, etc.
On new surfaces: Apply 1 coat of KRAFT EPOXY ANTIRUST PRIMER AQUA to ensure good adhesion of the paint and protection from alkalis. Follow with 2 coats of KRAFT EPOXY PAINT AQUA .
On previously painted surfaces with two-component epoxy paint: Sand the surface, remove dust and apply one coat of KRAFT EPOXY ANTIRUST PRIMER AQUA. Next, apply 2 coats of KRAFT EPOXY PAINT AQUA.
Mix 3 parts of component A with 1 part of component B of KRAFT EPOXY ANTIRUST PRIMER AQUA and stir very well at a low speed (1.5-2 min) until homogeneous, preventing air penetration into the mixture. To ensure proper adhesion and performance, strictly follow the mixing ratio. For a better homogenization, pour the components into another container and mix well. Allow the mixture to rest for 5–10 minutes prior to application..
Thinning: 5-10% with pure water.
Store the product at temperatures between 5°C and 35°C and at relative humidity